Specifications, Hardware – Brother P-TOUCH PC User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Specifications
Hardware
Main
unit
Operation
Display: LED (Power/Error)
Switches: Power switch
Feed and cut switch
Printer
Printing system: Thermal copy laminating / thermal transfer
Print head: 180 dpi, 128 dots
Printing height: 18 mm
Print speed: 30 mm/s
Power source
AC Adaptor 9V 2A
Dimensions
82(W)x226(D)x167(H) mm
Weight
approximately 1.300 kg
Interface
RS232C or equivalent (9-pin)
Tape cassette
Type: Laminating 6, 9, 12, 18, 24 mm
Non-laminating (thermal film tape) 24 mm
Lettering 12 mm
Tape length: 15 m
Sensors
Tape: Tape end sensor (photo sensor)
Cutter: Cut position sensor (leaf switch)
Cassette: Cassette sensors (x4) (mechanical sensors)
Power-on checks
When the power is turned on and the system initialized, if an error is detected, the LED is
turned off, DTR is set to BUSY (no Xoff) and the power remains on.
External error detection
When an error caused by noise or other external factors is detected, the power is turned
off.
1 2