Connecting the p-touch pc printer – Brother P-TOUCH PC User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the P-TOUCH PC Printer
Warning: Before you make any connection, be sure to switch off the
power to both the P-TOUCH PC Printer and the computer.
1.
Connect the connection cable to the P-TOUCH PC Printer and to
the COM connector (IBM) or printer connector (Macintosh) of
your computer.
Note: (IBM only) The end of the cable with two connectors goes to the
computer side. Use the connector that is compatible with the COM port
of your computer, and leave the other connector unconnected.
2.
Connect the AC adaptor to the P-TOUCH PC Printer and to an
AC outlet.
3.
Switch the P-TOUCH PC Printer on.
4.
Switch the computer on.
Note: To switch the system off, switch the computer off first, then the
P-TOUCH PC Printer and other peripherals.