Compaq MP2800 - Manual (Page 28)

Using the Projector 28
Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group
Pages: 10 Words: 1921 Saved date: 09/22/0010:22 AM File Name: Ch02.doc
■ Keystone—Adjusts image distortion at the top and bottom widths
of the screen caused by tilting the projector.
■ Picture—Adjusts the gamma value or degree of contrast of
darkness or light for the projected image.
■ Color—Adjusts color balance to compensate for ambient
conditions using three submenus:
■ Factory default.
■ Custom Color—Modifies the color temperature balance.
■ Saturation—Magnifies the color intensity.
■ Digital Conversion—Improves picture stability of user modes by
adjusting:
■ Clock—Increase/decrease the value to stretch or shrink the
image on the screen.
■ Clock Phase—Increase/decrease the value to minimize
video distortion or video jitter.
✎ If the projector image becomes distorted when adjusting the
Clock and Clock Phase values, continue adjusting the values
until the distortion disappears. To restore the factory
settings, select Factory Reset in the on-screen menu, or press
the
Resync
button.
■ Language—Allows the user to change the On-Screen display to
one of the languages in their native spelling. The current
language is highlighted. Select another language to display all
menu functions in that language.
■ Menu Location—Positions the on-screen menu at a convenient
location on the projector screen; positions the menu up or down,
left or right.
■ HDTV Setup—Allows the user to stretch the format to fill the
screen or to use the original aspect ratio and fill the screen, using
HDTV (High Definition Television) format. Refer to the
“HDTV” section later in this chapter for more information.
■ Management—Allows the user to control power saver
characteristics of the display, or to view the cumulative lamp
hours, reset the lamp hour timer, view the unit’s serial number, or
perform a Master Reset.