Compaq MP2800 - Manual (Page 46)

Care and Maintenance 46
Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group
Pages: 5 Words: 867 Saved date: 09/22/0010:10 AM File Name: Ch05.doc
CAUTION: Do not store a cleaning cloth in contact
with the lens for a long time as doing so may
contaminate the lens with dye from the cloth. The cloth
can be contaminated if left in the open air.
Replacing the Projector Lamp Module
!
WARNING: When the lamp reaches its end of life, it
may pop or rupture. To reduce the risk of personal
injury, be careful when removing the lamp cover as
broken glass may be present. Never open the lamp cover
while the projector is operating or when the lamp is hot.
The projector will alert you when the lamp approaches its failure
mode or end of life. When the message “Lamp May Fail Soon -
Replacement Suggested” displays on the projection screen, you
should change the lamp as soon as possible. Contact your local
Compaq authorized dealer, seller, or reseller to purchase a spare
lamp or have the lamp changed. You can also purchase a lamp
directly through
www.compaq.com
.