Compaq MP2800 - Manual (Page 36)

Using the Compaq Multimedia Adapter 36
Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group
Pages: 7 Words: 904 Saved date: 09/22/0010:18 AM File Name: Ch03.doc
Connecting a Video Player
✎ If your video player uses a round, one-prong composite video
connector, use the RCA video cable.
If your video player uses a round, four-prong S-video
connector, use the S-video cable.
Both cables are included with the Compaq Multimedia
Adapter.
1. Plug the RCA video cable into the video-out port on the video
player and the video port on the video adapter. If you are using
the S-video cable, connect it to the S-video out connector on the
video player and the S-video port on the video adapter.
2. Turn on the projector first, then the video player.
3. Press the
Source
button on the back of the Multimedia Adapter
to switch the projector signal from data to video. The data mode
receives computer inputs and the video mode receives video
input such as a TV tuner, videocassette recorder, or camera.
With the Compaq Multimedia Adapter attached, the projector is
compatible with major video standards such as NTSC, PAL, and
SECAM. Use the on-screen menu to adjust the video performance
manually or press the
Resync
button to optimize it automatically.