Cuisinart DLC-10C - Manual (Page 24)

P R A C T I C I N G S L I
A N D S H R E D D I N G
G I N G
ia
1. Insert a slicing or shredding
disc, put the covet on the work
bowl and insert the prepared tood
in the feed lube.
2.
Prepare the pusher assembly.
Lock the small pusher in place and
unlock the slide lock on back ol the
sleeve, so the pusher can move up
and down freely,
3. Slide the pusher assembly over
the teed tube and push the sleeve
down lo lock it into place. Apply
pressure to the pusher while
pressing the lever down to PUtSE
Release the lever as soon as the
food is sliced or shredded.
d. You can load the leed tube
repeatedly wilhoul removing the
work bowl cover. Simply grasp the
pusher assembly wilh your thumb
on Ihe wide locking lab. Press
firmly on the tab and lift up. The
pusher assembly will come oil
easily, leaving the cover and feed
lube in place. Your other hand is
free to reload the feed lube