Selecting frequencies ■ tuning control, Microphone [up]/[dwn] buttons – Kenwood TM-261A User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SELECTING FREQUENCIES
■ Tuning Control
Using the
Tuning
control is convenient when you are
within easy reach of the transceiver Front Panel, and
the frequencies to be selected lie near the current
frequency.
1
Press
[VFO]
to select VFO mode.
Q “ o O
O I "
> I i } I { .I I .1 t .I
I I
i;_t
KMHt
Li_________rOHE
REV
• Frequencies can also be selected via the microphone
keypad (MC-53DM only). See “KEYPAD DIRECT
ENTRY” {page 43}.
Microphone [UP]/[DWN] Buttons
Using microphone
[UP]/[DWN]
for frequency selection
is useful when mobiling or any time you are not
immediately in front of the transceiver.
Press
[UP]
or
[DWN]
once to change the receive
frequency by one frequency step in the direction
indicated by the button.
• Pressing and holding either button causes the frequency
to step repeatedly in one direction until the button is
released.
2 Turn the
Tuning
control to select a receive
frequency.
Clockwise rotation increases the frequency one
frequency step at a time.
Counterclockwise rotation decreases the frequency
one step at a time.
If you cannot select a particular receive frequency, the
frequency step size needs to be changed. See
“CHANGING FREQUENCY STEP SIZE” (page 45} for
further information.
15