Fluke 2180A - Manual (Page 44)

2180A
5-1. INTRODUCTION
5-2. This section contains an illustrated parts
breakdown of the instrument. A similar parts listing for
each of the options will be found in Section 6.
Components are listed alphanumerically by assembly.
Both electrical and mechanical components are listed by
reference designation. Each listed part is shown in an
accompanying illustration.
5-3. Parts lists include the following information:
1. Reference Designation.
2. Description of each part.
3. FLUKE Stock Number.
4. Federal Supply Code for Manufacturers. (See
Section 7 for Code-to-Name list.)
5. Manufacturer’s Part Number.
6. Total Quantity per assembly or component.
7. Recommended Quantity: This entry indicates
the recommended number of spare parts necessary
to support one to five instruments for a period of
two years. This list presumes an availability of
common electronic parts at the maintenance site.
For maintenance for one year or more at an isolated
site, it is recommended that at least one of each
assembly in the instrument be stocked. In the case of
optional subassemblies, plug-ins, etc., that are not
always part of the instrument, or are deviations
from the basic instrument model, the REC QTY
column lists the recommended quantity of the item
in that particular assembly.
5-4. HOW TO OBTAIN PARTS
5-5. Components may be ordered directly from the
manufacturer by using the manufacturer’s part number,
or from the John Fluke Mfg. Co., Inc. factory or
authorized representative by using the FLUKE STOCK
NUMBER. In the event the part you order has been
replaced by a new or improved part, the replacement will
be accompanied by an explanatory note and installation
instructions if necessary.
5-6. To ensure prompt and efficient handling of your
order, include the following information.
1. Quantity.
2. FLUKE Stock Number.
3. Description.
4. Reference Designation.
5. Printed Circuit Board Part Number.
6. Instrument Model and Serial Number.
* Indicates MOS devices which may be damaged by
static discharge.
5-2