Executing an^ to delete the setup code, Bj,.r'rof.rd, B-scii enter – Kenwood Preset Remote Control User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
; GéWng ìhé most from your remote comtqf;
Executing an^
To delete the setup code
iVIACRO
During opration, make sure you start the next step within 8
seconds of completing the previous one. if more than 8
seconds eiapses between any two steps, press the display
operation key so that the display appears.
•AiW
During opration, make sure you start thè next step within 8
seconds of completing the previous one. if more than 8
seconds eiapses between any two steps, press the display
operation key so that the display appears.
O
Press the li^ACRO key.
• "t'lRCPD E>iE" appears in the display.
Q
Press the display operation 1 key repeatedly until
‘tleni-i ”
appears in the display.
MRCRO EKE
Seleci f'fl
CRO
)
O
Press the IMIUSIC, IldOVIE, or TV key to execute the
corresponding macro play.
»"f'fiCRiD EKE" appears in the display and the pre-programmed macro
is performed:
MUSIC
"MFCRO 1",
MOVIE
"IlfiCRO 2",
TV
"MflCRO 3"
• Some devicestake up to 1 second to power on. The macro function
has an automatic delay after any power function output.
• Pressing a key other than
MUSIC, MOVIE,
or
TV
cancels the macro
program mode.
^
Press the [Menu] key repeatedly until
1-ji „ IF' ”
appears
in the display.
o
The setup display appears.
SEILJR
02. bJ,.r'rof.rd
Hopre a-Ttej-'
O
Press the
a
/V
keys to select
‘^I'l „
”
then press the
[Enter] key.
® The input selecting display appears.
S-03.UideQl
04.Video2
B-scii Enter'
vyhen
MUSfC
is pressed
O
Press the
a
/
w
keys to select the input that you want to
delete, then press the [Enter] key.
O
Press the
a
/
v
keys to select
'Delete. ”
S't33 Delete
01 5 CD
Bad< Ei-t,er'
O
Press [Enter].
® The setup code is deleted.