Care and maintenance, Notes on handing tape, Head cleaning – Kenwood KRC-999II User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Care and maintenance
•
The power source of this unit is exclusively DC 12 V, negative ground. If you wish to
mount the unit on a vehicle with DC 24 V, please consult your appointed KENWOOD
dealer.
•
Do not place the cassette tuner in a place where the cassette tuner may be exposed to
direct sunlight, heat or moisture. Be careful that metal objects and water do not enter the
set.
•
If you have difficulty in installing the set in your car, please contact your KENWOOD
dealer.
Notes on handing tape
• Before loading a cassette, check the tape for slack. If there is slack tape, remove it using a
pencil.
• Do not expose the cassette tape to direct sunlight. Leaving a cassette at high temperature
or humidity can deform the cassette shell or tape.
•
120-minute tape is very thin. Avoid its use, because it can easily be twisted around the’
pinch roller.
Head cleaning
Magnetic particles from the tape adhere to the head surface after a long period of use,
resulting in noise and poor quality sound. Clean the head with cleaning tape available at your
stereo shop. And follow the directions with the head cleaner.
12
(En)