Installation, Install the mounting sleeve, Insert the krc-99911 into the sleeve – Kenwood KRC-999II User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Installation
1. Install the mounting sleeve.
•
Install the sleeve to the chassis
NA/ith lugs. Bend the lugs using a
screwdriver.
♦ The lugs differ depending on the
thickness of the dash panel.
2. Insert the KRC-99911 into the sleeve.
• Mount the panel with brackets to the unit as shown in the figure.
♦ Insert the unit into the sleeve, and it will be fixed with both sides.
Bracket
'T<
Trimmed panel
Note: Fix the trimmed panel to the KRC-99911
after mounting the bracket to the panel.
16
(En)
Advertising