Fix the krc-999ii with stays, How to remove the krc-999ii – Kenwood KRC-999II User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising

3. Fix the KRC-999II with stays

Part of chassis

[How to remove the KRC-999II]

L-shaped wrench

Mounting screw (M4 x 6}

1. Remove the mount

ing

screw

(M4x6)

retaining

the

back

panel of the KRC-
999n.

Then,

drive

L-shaped

wrenches

into the holes on both

sides.

2. Pull out the L-shaped

wrenches by hooking
the

fingers

simul

taneously.

(En)

Advertising