Kenwood KRC-999II - Manual (Page 2)

Controls and indicators
Reset button
When the installation and all the
wirings are finished, press this but­
ton.
Not usually used. However, when
the microprocessor (micro­
computer) malfunctions, press
this button using a sharp-pointed
object (such as a pencil).
When this button is pressed, the
unit IS reset to its initial state.
Therefore, all the memories and
clock are erased and need to be
adjusted.
[TAPE]: Fast Forward/
Rewind switch
Each switch permits Fast Forward
or Rewind operation. To release
the operation, press the Play/Pro-
gram switch,
[TUNER]: Tuning Up/Down
switch
Press the Up switch' to shift to a
higher frequency. Press the Down
switch to shift to a lower frequen­
cy. A single pressing of the switch
allows the frequency to vary one
step at a time. When the switch is
kept
pressed the frequency
changes continuously.
When the knob is moved once,
the frequency is changed by
200 kHz in FM mode and 10 kHz
in AM mode.
[EQ]: Equalizer level
Up/Down switch
Press the Up switch to increase
the equalizer level and the Down
switch to decrease it. The
equalizer level changes by one
step when the switch is tapped
once, and changes continuously
when it is kept pressed.
Cassette tape slot
Insert the cassette tape into this
slot with the cassette shell open­
ing at the right until it reaches to
the end of the slot. In this condi­
tion, tape will be automatically
loaded when the Play/Program
switch is pressed (this switch can­
not be pressed when tuner is ac­
tivated) or push the cassette fur­
ther to engage manual loading.
Volume
indicator
Indicates the pre­
sent volume level.
As the volume
level increases,
more indicator
segments tight,
and in the same
way, as volume
level decreases,
more
indicator
segments go off.
J U
[TAPE]: Play/Program switch
If this switch IS pressed during playback, the tape
direction is reversed. If this switch is pressed during
Fast Forward or Rewind mode, the Fast Forward or
Rewind mode is released and the unit enters Play
mode.
[TUNER]: Band selector/Indicators
Selects reception band. Indicates the current receiv-
•ing band.
FM1 FM2 FM3 AM
(Em