Selecting a channel, Channel auto step, Selecting a channel channel auto step – Uniden UH-088 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4v To set the "Squelch Gate" to the desired level, turn SQUELCH counterclockwise
until you hear noise. Then turn the SQUELCH clockwise just until the noise stops.
Now only strong signals get through.
Strong Signals -
Medium Signets -
Weak Signals •
1
Selecting a Channel
1. When you turn on the UH-088, the last channel used will appear on the LCD display,
eg. CH01
2a. Press ▲ to select a higher channel.
- or-
2b. Press ▼ to select a lower channel.
Channel Auto Step
To quickly change channels, press and hold ▼ or A .
Note: A short tone sounds when you press either T or A and the channel changes.
Another tone sounds when Channel Auto step begins.