Receiving calls when in quiet mode, Activating the tone squelch (receiver quieting) – Uniden UH-088 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1. Press the TSQ button. One beep is heard and the TSQ indicator appears on the
display, UH-088 is now progrannmed to operate in Quiet Mode.
Activating the Tone Squelch (Receiver Quieting)
In this mode, the microphone PTT is disabled until a signal with your Selcall ID is
received.
2. To deactivate quiet mode, press the TSQ button again. Two beeps are heard and
the TSQ indicator disappears from the display.
Pressing the SELCALL button will also deactivate Quiet Mode.
Receiving Calls when in Quiet Mode
The UH-088 will respond in the same way in Quiet Mode as when it is called while in
normal mode.
20
Advertising