Operation with video components, Playback of video tape, Recording of video source – Kenwood B60-0763-00 User Manual
Page 20: Switch the power of the monitor tv on, 2 press the video 1 key, 3 play the vcr, 4 adjust the volume, 2 press the video 2 key, 3 play the video source component, 4 put the vcr in the record mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation with video components
For the connections and operations, aiso read care-
fuily the instruction manuals supplied with the video
components to be connected.
When connect to the KENWOOD LD player having system
control terminal, do not connect anything to the system con
trol terminal of the LD player.
Playback of video tape
Recording of video source
^ Switch the power of the monitor TV ON.
2 Press the VIDEO 1 key.
VIDEO 1 light up.
I / T Ti c: ri
,
1'
-L
jj
L
lj
■
The display shows the
present audio input.
I When an input selector key other than VIDEO is pressed, the
audio input of the selected source will be played in place of
the audio input from VIDEO 1.
3
Play the VCR.
4 Adjust the volume.
1
Connect the video source component to be
recorded to the VIDEO 2 jacks.
• A video player deck, video camera, LD player, DBS tuner, etc.,
can be connected.
2 Press the VIDEO 2 key.
VIDEO 2 light up.
I / -r Ti r; n
1
' J-
M t. u
The display shows the
present audio input.
I When an input selector key other than VIDEO is pressed, the
audio input of the selected source will be played in place of
the audio input from VIDEO 2.
3 Play the video source component.
4 Put the VCR in the record mode.
20
KR-V6040 (En)