System connections, Connection of audio components – Kenwood B60-0763-00 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
System connections
Make connections as shown in the diagram beiow. When connecting the reiated system components, refer aiso to the
instruction manuais of the reiated components.
Do not piug in the power iead untii ail connections are completed.
■ Connection of audio components
For the connection of video components, please refer to page 20.
Rear speakers
Right
Left
Speaker system A
Right
Left
Speaker system B
Right
Left
FM DE-EMPHASIS/
CHANNEL SPACE switch
(Except for some areas.)
Refer to the 'Antenna
connections* section.
Ho _ o|
°°°°°
a
---------* rr^
Turntable
Tape deck 1
|si--------
o[Ln=aJ =
**
J
—
‘ "
a
0
o o
Notes:
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.
2. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.
3. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connec
tion cords without removal of the power cord can cause malfunctions or damage to the unit.
KR-V6040 (En)