2 900 system firmware, 3 changing system firmware - 2 – Fluke 900 User Manual
Page 95
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
FLUKE 900 SERVICE MANUAL
Maintenance
ECO-018
This connects the 16th address line to the cartridge buffer.
Install wire from U9 pin 3 to J6 pin 30.
5.5.2 900 System Firmware
The version of the 900 documented in this manual requires firmware level 5.00 or higher. At
the end of 1992, the most current firmware was 6.00 . Refer to Section 5.2.3 for instructions
on upgrading firmware.
5 - 1 7
Advertising