3 select the dolby pro logic surround mode, Turn on the subwoofer, Hecommended speaker installation – Kenwood 1070VR User Manual
Page 15: R t r
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■4-
To enhance the surround modes, various parameters can be
set up lt> accufiiuduLe liie speaker system used and the
environment of the listening room. Thefoltowing procedure
let you set the parameters of the surround modes {DOLBY
PRO LOGIC, DOLBY 3 STEREO and DSP).
Once llie settings have been dune, it is iield in rneinory su
readjustment is not necessary even after the mode has been
changed.
1D7QVR/10B0VR (En/K)
Hecommended speaker installation
It is recommended that the surround speakers are installed straight
to the left and right of the listening position or slightly behind, at a
lieiyliLufdbiLiul 1 II
iKLer
hiyli«! Lliaii
Llit?
liioLyiKcfi'y uaiy Eauli yuifound
speaker should be installed so that the longer sides are horizontal.
^3
Select the Dolby Pro Logic surround mode.
:-WO
Turn on the SUBWOOFER.
* The following adjustments (center mode, test tone, etc.) are common
for all surround modes, including DSP You do not need to make
separate adjustments for each sound mode.
Lights
n
n n
I I V I..J
I
n
r T r
L L.I U ..L
When DOLBY PRO LOGIC is selected
Whfin ynu sfilfittt PRO I OGIO, pach prfts.s of th(= CENTER MODE
key switches the center mode as follows
. CD
"NORMAL"
:When using a standard (small) center
speaker.
(D
"WIDE BAND"
:wrien using a full range (large) center
speaker.
.
® "PHANTOM"
:When not using a center speaker.
> If
you
did not connect a subwoofer, select
"SUB OFF".
I"'" 1 I Tl
|■'~I H i
;
d
u
.1)
u
I
«
SURROUND
Display when the subwoofer setting is selected