Before appiyintf the power, Units are designed for operation as follows, Ac voltage selection – Kenwood 1070VR User Manual
Page 2: Caution, Unpackings, Safety precautions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ Г'--.
áwfe iopeiationt.^'
107QVR/1DS0VH [En/KJ
Before appiyintf the power
Units are designed for operation as follows.
U.S.A. and Canada.......................................................... AC 120 V only
*Other countries...........................AC 110-120/220-210 Vswitchable
* AC voltage selection
The AC voltage selector switch on the rear panel Is set to the voltage
that prevails in the area to which the unit is shipped. Before
connecting the power cord to vour AC outlet, make sure that the
setting position of this switch matches your line voltage. If not, it
must be set to your voltage in accordance with the following direc
tion.
Note:
Our warranty does not cover damage caused by excessive line
voltagedueto improper setting of the AC voltage selector switch
AC voltage selector switch
Safety precautions
WARNING :
TO PREVENT riRE OR ELECTRIC SI lOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
A
CAUTION
A
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL
A
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL. WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE
OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
A
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF
MPORTANT OPERATING AND MAINTENANCE (SERVICING) INGTEIUCTIONG IN THE LITERATUnL ACCOMPANYING
THE
APPLIANCE.
Unpackings
i'i ■.-*
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.
Examine the unit for any possibilityof shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your
unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the
unit) can file a claim against the carrier for shipping damage.
We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.