The operation panel keys – Canon 400 User Manual
Page 16
12
Work safely!
The operation panel keys
1
Negative/Positive key
Three settings are available:
(
) In negative film mode, produces positive prints from nega-
tive film images.
(
) In positive film mode, produces positive prints from posi-
tive images.
(
) In automatic mode, selects the mode based on the type of
film detected.
2
Border key
Allows you to remove the dark background or trim the area of the
image that you want to print.
Three settings are available:
(
) Frames an area.
(
) Automatically removes the black border around the image
for printing.
(
) Automatically removes most of the black border around
the image but leaves a border up to 5 mm around the im-
age.
3
Print Density display
Displays the selected print density. Also displays the sharpness
and date messages when you set these features.
4
AE On/Off key
Turns automatic print density selection on and off.
If the FilePrint 400 is connected, Hold down the [AE] key for
about 5seconds to start the cleaning mode. “A4” is shown in the
page count display.
5
Print Density Adjustment key
Press to select print density automatically.
3
1
2
4
5
6
7
8
9