Canon 400 - Manual (Page 21)

17
OPERATING PROCEDURES
■ Automatic adjustment
Press the AE key on the keyboard or operation panel, so that the
lamp above the key comes on. The MS400 adjusts the print den-
sity automatically.
Even when using automatic adjustment, you can still
use the Print Density Adjustment keys to fine tune the
setting. The Print Density display changes accordingly.
You can fine tune to 17 different levels.
■ Manual adjustment
Make sure that the lamp above the AE key is off. (If necessary,
press the AE key so that the lamp goes off.) Then adjust the den-
sity by pressing the appropriate Print Density Adjustment key (right
arrow or left arrow) on the keyboard or operation panel. The Print
Density display changes accordingly, with rightward movement
indicating higher density. You can set to any of 33 levels.
5 . Set the paper size that you want to print.
■ If you use Fileprint 250, please select paper size set on
the Paper Tray.
(1) Press the Clear/stop key and keep on for about 5 seconds to
enter the paper size setting mode. At that time, the current paper
size appears on the print display.
A4
Letter
B5
Legal
(2) When pressing plus (+) key of the print number setting key,
the display is changed in due order as
➞ ➞ ➞ . On
the other hand, when pressing minus (-) key, the display is changed
in due order as
➞ ➞ ➞ .
(3) Press the Clear/stop key to define paper size that you want to
use.
■ If you use Fileprint 400, please select the Paper Cas-
sette or Paper Tray you want to use.
The paper size to be set on the paper tray will be se-
lected by a service technician at the installation of
Fileprint 400.
(1) Press the Clear/stop key and keep on for about 5 seconds to
enter the cassette select mode. At that time, the current paper cas-
sette appears on the print display.
Print display Tray selection
Multipurpose tray selected
Upper cassette selected
Lower cassette selected