Canon 400 - Manual (Page 9)

5
Work safely!
With no variation
more than 10%
above the rated
power on the unit
label.
Selecting a power source
Power supply requirements
U.S.A. 120V, 50-60 Hz
Europe 220-240V, 50-60 Hz
(other areas)
If you have any questions about the power source at
your work site, contact your supplier or the power com-
pany.
■ The unit should have an independent power source that is not
shared with any other electrical device. If you have to use an ex-
tension cord or power strip, make sure the total ampere rating for
all the equipment does not exceed the ampere rating of the exten-
sion cord.
■ Do not place anything on the power cord, and do not locate the
unit where people working around the unit will walk on the cord.
■ Do not bundle the power cord or wrap it around an object like a
table or chair leg. The area around the unit should be clear of all
obstacles. In case of an emergency, you should be able to reach
the power source quickly to unplug the cord.
■ To remove the power cord from the power outlet, grasp the head
of the plug firmly to remove it. Never pull on the cord to remove
the plug from the power outlet. Never touch the power cord with
wet hands.
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;