Cassette magnetic tape operations – Toshiba TEC SL59 SERIES User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
El'04189
8. CASSETTE MAGNETIC TAPE OPERATIONS
The SL59 is designed to interface with a cassette magnetic tape. This tape unit allows the transfer of the
entire PLU file from the SL59 to the tape. This can be accomplished using a number of operation steps. In
turn, information from the tape can also be transferred to other SL59.
1) SAVE(SL59 - CMT)
Control lock:
PR1 position
j
Start the tape to be recorded after entire rewinding.
Index
I
1
I
Confirm the magnetic painted part of tape running the Head.
(Over 5 sec. after Starting.)
Depress:
SAVE key
2) SAVE Comparison
Rewind the tape entirely again.
Start the CMT to play (Not recording).
Index I 2 I
I
Depress:
SAVE key
3) Load (CMT - SL59)
Start the CMT to play (Not recording).
Index
I
3
j
Depress:
SAVE key
4) Load Comparison
Same procedures as "SAVE comparison".
5) Errors
Comparison Error (-4):
Header Error (-2):
Time Over Error (-3):
Hard Error (-1):
Warning for being different points after comparison.
Warning for the use of another Spec. Tape.
'
Warning for being over time (14 seconds) after depressing ! SAVE
key in Load and Comparison (Not save operation).
Warning for the status Error.
NOTE 1: The error mode can be released by depressing [ C | key, and try to operate again according to
the above steps.
2: When SAVE operation (SL59 CMT) cannot be executed in 4 seconds after depressing
SAVE key, it will result in Time over error mode.
- 10 -