Label threading 14. cleaning the print head – Toshiba TEC SL59 SERIES User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
E1-04189
13. LABEL THREADING
14. CLEANING THE PRINT HEAD
If the print head is dirty, clear printing is not performed. It is recommended to clean the head with thermal
head cleaner everyday, before starting operation by following procedure:
1)
Remove the printer cover and right side
cover.
2)
Push the head hold lever to arrow direc
tion.
3)
Lift the head pusher plate in the direc
tion of the arrow with your hand, and
hang its pin to 3rd. groove of the head
hold lever in order to allow the print
head to be easily seem.
4)
Wipe off the dirt on the [■■! portion]
with the thermal head cleaner.
Then push down the print head.
NOTE: DO NOT DAMAGE the print head
when cleaning.
- 5 0