Denon AVR-2500 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2-4 Connecting the video components
To connect the video signal, connect using a 75 0/ohms video signal
cable cord. Using an improper cable can result in a drop in sound quality.
ID player, CDV player, TV, etc.
Video deck 2
Video deck 1
2-5 Connecting the S-video terminals
• A note on the S input Jacks
The input selectors for the S inputs and pin jack inputs work in conjunction with each other.
» Precaution when using S-jacks
This receiver's S-jacks {input and output} and video pin jacks (input and output) have independent circuit structures, so that video
signals input from the S-jacks are only output from the S-jack outputs and video signals input from the pin jacks are only output from
the pin jack outputs.
When connecting the receiver with equipment that is equipped with S-jacks, keep the above point in mind and make connections
according to the equipment instruction manuals.
2-6 Connecting camcorder or game (V-AUX/GAiViE)
This unit is equipped with VIDEO AUX jacks on the front panel for playback of video equipment or playing games.
Camcoder or Game