Toshiba MA-290-100 SERIES - Manual (Page 20)

CARD
NO
CARD NO. KEY [CARD NO]
This key is used to enter the code number (1 to 12) which classifies
the credit sales, followed by the sale finalization with the [Chg]
key.
To operate, enter the Card Code number (1 to 12), and depress [CARD
NO] (at this time the Card Code is not printed). Then depress the
[Chg] key to finalize the sale. The sale total will be processed into
the Charge-in-drawer and the Individual Credit-in-drawer total
memories respectively.
A wrong Card Code entry up to the [CARD NO] key but before the [Chg]
key depression can be corrected by the [C] key. But it is not
possible to correct a Card Code entry and print after the [Chg] key
depression.
If the "Card No. Compulsory" option is selected, the [Chg] key
operation will not be accepted without a Card Code entry.
Multi-tendering is allowed with multiple Card Nos (if [Chg] is
progranuned to allow tendering), by repeating to enter each Card No.
before [CARD NO] and its amount tendered before [Chg].
If the [Chg] key is programmed to allow finalizing Received-on-Account
payment items, the Card Code entry operation described above is
allowed even to finalize Received-on-Account payments or to finalize
payment entries for a sale with previous balance.
If a validation print is performed for a [Chg]-finalized sale with a
Card No., the Card No. will not be printed on the validation slip.
VND
CPN VENDOR COUPON KEY [VND CPN]
This is a motorized credit key to subtract vendor coupon amount from
the sale.
To operate, enter the coupon amount and depress the [VND CPN] key.
This operation can only be performed inside a sale. The coupon amount
to be entered must not exceed the sale total unless the "Credit
Balance" option is selected.
This key can be programmed with Amount Limit (max. 4-digit value), tax
status, validation compulsion, and manager intervention.
To override the programmed amount limit, the "MGR" position of the
Mode Lock is required, but the [LC OPEN] key will not be effective.
Quantity extension using the [VND CPN] key is not possible.
DOLL
DISC
DOLLAR DISCOUNT KEY [DOLL DISC]
This key is used to subtract an amount from the sale such as a
discount during a sale. An amount exceeding the sale total can not be
entered unless the "Credit Balance" option is selected.
- 16 -