Toshiba MA-290-100 SERIES - Manual (Page 35)

SELECTIVE ITEMIZED (Si) STATUS MODIFICATION
Depress [SI/M] before or after the amount entry but before the last key
of the entry sequence of the required Department or PLU.
FOOD STAMP (FS) STATUS MODIFICATION
Depress [FS/M] before or after the amount entry but before the last key
of the entry sequence of the required Department, PLU, [%+]»
[DOLL DISC], or [BTL RTN]Craotorized-inside-sale type).
SCALE ENTRY, TARE ENTRY
AUTO SCALE WITHOUT TARE
[SCALE] [ unit price ([OPEN DEPT] ♦ ---
[SCALE] ♦ [PRESET DEPT] ♦ ---
([SCALE]) [Preset PLU Code j [PLU]
^nay be omitted for Scale PLU entry.
([SCALE]) [open PLU Code][FLU] > jUNIT PRICE][AMT]
AUTO SCALE WITH TARE
Tare Table No.|[TARE
(1 to 9)
[ unit PRICE
I
[OPEN DEPT] ♦ ---
[PRESET DEPT] ----
' [Preset PLU Code] [PLU] ---
► ¡Open PLU Codel[PLU] ♦ [UNIT PRICEI[AMT]» ■
[PR OPEN]¡Tare Weight Manual Entry![TARE] ♦ To be continued to
(unit: 1/100 LB or g) the sequences marked with
above.
MANUAL SCALE ENTRY (May be programmed to be prohibited)
¡Net Weight Manual Entry![SCALE] To be continued to the sequences
(upit: 1/100 LB or g) marked with above.
VOID OR RETURN MANUAL SCALE ENTRY (May be programmed to prohibit any
manual scale entry except VOID or
RETURN, or including VOID and RETURN.)
VOID] --
; rtn mdse
To be continued to the sequnce for "MANUAL SCALE ENTRY"
above. (The Net Weight must be entered manually in
this case.)
NOTES: 1. PLUS operated here must be programmed as "Scale Type"; no other
PLUS may be used for scale entries.
2. In the Negative Mode (i.e., in the position of the Mode
Lock, any scale items must be recorded with a manual net weight
entry. Therefore, follow the "MANUAL SCALE ENTRY" and "VOID OR
RETURN MANUAL SCALE ENTRY" described above. The
manual-scale-prohibited status will be disredarded in the
Negative Mode.
- 31 -