Toshiba TEC MA-1040-400 Series - Manual (Page 13)

PR
OPEN
LC
OPEN
OPEN
This key is used to modify the status of preset department keys. When
the [PR OPEN] key is depressed prior to depressing a preset department
key (either before or after the numeric entry), the preset department
key is reversed to non-preset (i.e. open) and allows amount entry
through the numeric keyboard.
If a preset department is entered with a price through the numeric
keyboard using the [PR OPEN] key in the manner just mentioned, no
repeat operation for the same price entry is then possible for that
department key.
The [PR OPEN] key can not be used with the [PLU] key.
LISTING CAPACITY OPEN KEY ([LC OPEN])
This key is used to release the listing capacity on each Department
(or on each open PLU linked to the department accordingly) or media
key. To operate, depress the [LC OPEN] key before depressing the
department (either before or after the amount entry), or any time
before the [AMT] key in an open PLU entry sequence, or before
depressing the media key.
By depressing the [LC OPEN] key, the HALC (High Amount Listing
Capacity) will be released to allow a numeric entry with two further
digits, and the LALC (Low Amount Listing Capacity) will be one digit
less than the programmed value, as to the department/PLU entry. As
for the media keys, the HALC will be extended to allow one further
digits.
The [LC OPEN] key will not function release the amount limit setting
on the [VND CPN] key.
In order to allow an amount entry beyond the values defined with the
use of the [LC OPEN] key, the Mode Lock must be turned to the "MGR"
position, which position also allows a any amount entry through the
[VND CPN] key.
PR-AND-LC OPEN KEY ([OPEN])
This is a dual-function key that has both [LC OPEN] and [PR OPEN] key
functions.
PRESET OPEN KEY ([PR OPEN])
NON-ADD NUMBER PRINT KEY ([#])
When the Mode Lock is in the REG, MGR, or □ position, this key is
used to print a non-adding number (such as Customer No., Check No.,
Credit Card No., etc.) on the receipt and journal for future
reference.
To operate, enter a maximum of 8-digit number and then depress this
key. The number is then printed. This operation may be performed
any time between items, before or after all the sale items (if
operated before finalizing the sale).
- 9 -