Toshiba TEC MA-1040-400 Series - Manual (Page 27)

REGISTERING PROCEDURE FOR SALES
The following are patterns for actual registering operations. In the
following examples, "|____ |" indicates an input through the numeric keys,
"[ ]” indicates a depression of the transaction key, and ”------ " indicates
other registering and/or finalizing operations.
One of the Clerk Keys must be set to its ON position to start operations. The
Mode Lock should usually be set to the "REG" position using the REG Key.
However, if the "MGR" Requirement" status is programmed on the transaction key
or its operation sequence, the clerk must ask the store manager to turn the
Mode Lock to the "MGR" position using the MGR or MA Key.
NO-SALE (Allowed only outside a sale)
[NS] (or [#/NS])
DEPARTMENT ENTRY
1
PRICE
I
-> [Open DEPT] ---
[Preset DEPT] + --
[PR OPEN] +
I
PRICE
I
[Preset DEPT] ---
NOTE: [LC OPEN] may be depressed either before or after the price entry
but must be depressed before the department key.
PLU ENTRY
¡Preset PLU Code
1
[PLU] -> ---
1 to 999
I
Open PLU Codel [PLU] + [PRICE
I
[AMT] 4 ---
I
QUANTITY
I
[g/FOR] -> [Preset DEPT]
QUANTITY EXTENSION (MULTIPLICATION)
■* ^---
May be omitted if the QUANTITY is a one-digit value,
[PR OPEN] 4
I
QUANTITY
I
[@/FOR] ♦ ([LC OPEN])
I
PRICE
I
[Preset DEPT] +
I
QUANTITY
I
[g/FOR] 4 ([LC OPEN]) ^
I
PRICE I[Open DEVT] * ---
I
QUANTITY I[g/FOR] ^ [Preset PLU Codel[PLU] * ---
[Open PLU Codel [PLU] ♦
I
QUANTITY
I
[0/FOR] -►
I
PRICE
I
[AMT]
NOTES: QUANTITY ... max. 3 integral digits + 3 decimal digits
PRICE (Unit Price) ... max. 6 digits
PRODUCT ... must not exceed 7 digits
- 23 -