Toshiba TEC FDS-30 User Manual
Page 107
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOl-11032
NOTES
:
1.
Depress
only
the
key(s)
for
the
required
status
change(s).
[RTN],
[TXVM],
[TX2/M],
[TX3/MJ,
[SH/M],
[S12/M],
and
[FS/M]
keys
will
function
to
reverse
from
the
current
status to the other.
2.
For
the
name
of
each
department,
a
maximum
of
10
regular-sized
or
5
double-sized
characters
may
be
entered.
A
combination
of
both
types
is
also
available.
If
no
name
is
programmed
for
a
department,
the
Department
No.
(ex.
"DPOI")
will
be
printed
on
the receipt and reports as the Department name.
3. If only a department name is set or changed, refer to the following operation sequence.
3[X1
> I Peot Code I [DP#]
Character Entries
[ST]
to change the dept’s
name
-► [ATyTL]
Repeatable another dept to change only its name.
- 41 -