To our customers, Precautions, Remarks on the location – Toshiba TEC FDS-30 User Manual
Page 7: Remarks on operating the ecr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
E01-1103Z
1.TO OUR CUSTOMERS
Thank you for choosing the TEC electronic cash register FDS-30 series. This instruction manual
provides a description of the functions and handling of this register and should be read carefully to
ensure optimum performance. Since every consideration has been given to safety and reliability,
there is no danger of damaging the machine by incorrect operation.
Please refer to this manual whenever you have any questions concerning the machine. This
machine has been manufactured under strict quality control and should give you full satisfaction.
However, if the machine is damaged during transit, or there are any unclear points in this manual,
please contact your local TEC representative.
•
The specifications described in this manual may be modified by TEC, if necessary.
•
Be sure to keep this manual for future reference.
2. PRECAUTIONS
The ECR is a precision machine. Please handle it carefully considering the following guidelines.
REMARKS ON THE LOCATION
•
Place it where no unusual temperature changes are expected.
•
Place it on a flat and level surface with little dust, humidity, vibration, etc.
•
Keep it away from water sources.
•
Do not use it in direct sunlight for a long time.
•
Ensure proper ventilation so that the machine is not exposed to excessive heat.
•
Be certain to connect a grounding wire to prevent the generation of static electricity and noise
troubles. Never share the same power outlet with many other electric appliances.
REMARKS ON OPERATING THE ECR
•
The keys on the keyboard function with a light touch. Avoid pressing the keys too hard.
•
Do not handle the machine with wet hands, since this may cause electrical malfunctions and
corrosion of parts.
•
Do not apply thinner, benzine, or other volatile materials to the cabinet or other plastic parts.
Such liquids will cause discoloration or deterioration of the cover, if dirty, wipe off with a
piece of cloth soaked in a neutral detergent and wrung out thoroughly.
•
Turn off the power switch when the operations are over for the day.
•
Ask your TEC representative to provide periodical maintenance to ensure the optimum
performance of the machine.
•
As for other operations, follow the instructions in this manual.
- 1 -