Toshiba TEC FDS-30 User Manual
Page 119
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOl-11032
This programming is available for only PLUs for which the stock function active has been selected by
“PLU TABLE PROGRAMMING OR CHANGING (Submode No.4)”.
PLU STOCK QUANTITY PROGRAMMING OR CHANGING
(Submode No.24)
Any time outside a sale
Mode Lock: SET
24 [@/FOR]'
i
PLU Code
1 to 9999
(PLU3
Repeatable for the
PLU of the next
sequential code.
I
Stock Quantity |
0 to 8999
(for newly set)
I Adding Quantity |
max. 4 digits
(for stock add)
> [RTN MDSE]
Subtracting
Quantity
max. 4 digits
(for stock subtract)
[STOCK]
NOTES
Repeatable for other PLUs.
1. On the
“
1
PLU Code
1
[PLU]"
’ enfry,
the current stock quantity is
displayed.
2. The total stock quantity of a PLU after addition or subtraction must
not exceed the value range from -1000 through 8999.
3. The PLU code here must exist in the PLU Table and must be set
PLU stock-process status.
[AT^L]
ex.)
To change the stock quantities of the following PLUs ;
(Presumed that PLU 90 is stocked of 240 and PLU 91 is
stocked of 550.)
PLU Code
90
91
Stock Change
Add
1000
Subtract 200
Mode Lock to SET
24 [®/FOR]
90 [PLU] 1000 [STOCK]
91 [PLU] [RTN MDSE]
200 [STOCK]
[ATЯL] to end.
09
-
21-90
»0
PLU0090
PLU0091
1000
1240
200
-
350
0054 13:08TH
-53