Toshiba TEC FDS-30 - Manual (Page 55)

EOl-11032
Guest Check Printer (hardware option) Operation
The TEC Guest Check Printer DRS-107 may be connected to the FDS-30 series ECR as an
optional device.
1. The guest check printer will automatically activate printing when the slip has properly been
set to the printer table.
The following are programmabilities as to the Guest Check Printer Operations :
PRINT START LINE AND LIMIT LINE SETTING
Appropriate values be set to meet the guest check slip used by each store.
SYSTEM OPTION
• Double Slip Print or Single Slip Print
Double Slip Print means to print the total amount, consecutive No., time, date, and
register No. twice.
(except sales include previous balance)
• Date Print or Non-Print
• Guest Check Compulsory or Not Compulsory for every sale with Previous Balance
2. The gap of the slip inlet is usually opened, and the slip may be inserted or withdrawn freely
outside a receipt/journal print sequence.
3. The EJECT key on the DRS-107 may be used to open the closed gap in order to withdraw
the slip and skip unnecessary item print. The EJECT key will be disregarded if the slip is
set and the ECR receiptjournal printer is in a printing action.
4. Printing on the guest check printer will be performed alternately with printing on the
receipt/ journal printer is in a printing action.
5. When printing of a check requires more than one page, operate as in the following for
multi-page process ;
1) When printing reaches the last line (limit line) of the first page, printing stops, and
the AMOUNT portion of the display flickers.
2) Withdraw the first page, and insert the second page.
Then depress the [C] key on the ECR Keyboard. Printing resumes.
6. To make an additional order(s) when an entry(ies) has already been made on the check
slip, use the [GCP LINE#] key. For its entry procedure and a receipt sample, refer to
Additional Order (page 24).
-49 -