Toshiba IK-DP20A - Manual (Page 11)

6.4 CAMERA SETUP
6.4.1 FUCUS CONTROL
Direct
- The focus can be controlled directly using near or far focusing controls.
- The focus control has 4 varying speeds.
- One Push Trigger Auto Focus is available.
Menu
MAIN MENU CAMERA MENU FOCUS MENU
- The Focus control has four options; Manuai/Auto/lnterval/Zoom Trigger
- In the manual mode the IK-DP20A focus will be directly controlled with the near
and far controis.
- When the camera is in Auto Mode, pressing the near and far controls will place the
camera in manual mode until there is a zoom or pan/tiit function.
- In Interval mode, the camera will switch between auto focus and manual focus
according to the Active Time and Interval Time respectively. Active Time (auto) ->
Interval Time (manual)^Active Time (auto) -^Interval Time (manual)...
- The interval and active times can be set from Is to 255s.
- In Zoom Trigger mode, the camera remains in manual mode unless there is a zoom
function and will return to manual mode after the zoom function is completed.
- The sensitivity of the Auto Focus can be set to NORMAL or LOW.
To change the Focus options:
1. Enter 95 preset to access the main menu
2. Position the cursor (->) next to CAMERA SETUP and press the OPEN button to
access the Camera menu.
3. Position the cursor next to FOCUS and press the OPEN button to access the Focus
menu.
4. Position the cursor next to the desired option and press the OPEN button to move
the cursor to the right.
5. Move the joystick up or down to select option setting.
6. To accept the selection, press the OPEN button or to cancel the selection, press
the CLOSE button.
- t o -