Toshiba IK-DP20A User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MAIN MENU
OTHERS MENU
<CAMERASETUP>
POWER UP PARK
<PAN/TILT SETUP>
^FREEZE ACTIVITY ON
<PRESET TITLES>
LOAD FACTORY DEFAULT
^<OTHERS>
EXIT
TILTANGLE INDOOR
To set STOP TIME;
1. Enter 95 preset to access the main menu.
2. Position the cursor (->) next to OTHERS and press the OPEN button to access the
menu.
3. Position the cursor next to FREEZE ACTIVITY and press the OPEN button to move
the cursor to the right.
4. Move the joystick up or down to set freeze activity to ON or OFF.
5. To accept the selection, press the OPEN button or to cancel the selection, press
the CLOSE button.
6.7.3 LOAD FACTORY DEFAULTS
The factory default settings can be loaded.
MAIN MENU
OTHERS MENU
<CAMERASETUP>
POWER UP PARK
<PAN/TILT SETUP>
FREEZE ACTIVITY ON
<PRESETTITLES>
,------- \
^LOAD FACTORY DEFAULT
^ <OTHERS>
EXIT
W
TILTANGLE INDOOR
To set LOAD FACTORY DEFAULT:
1. Enter 95 preset to access the main menu.
2. Position the cursor (->) next to OTHERS and press the OPEN button to access
the menu.
3. Position the cursor next to LOAD FACTORY DEFAULT and press the OPEN button
twice to load factory default settings.
-
22
-