Toshiba IK-DP20A - Manual (Page 12)

6.4.2 WHITE BALANCE CONTROL
Direct
- The White Balance can be set by One Push Trigger operation.
Menu
MAIN MENU CAMERA MENU
-XCAMERA SETUP> <FOCUS>
<PAN/TILT SETUP> WB ATW
<PRESET TITLES>
1------\
<AE>
<OTHERS> ^ ZOOM LIMIT X18
EXIT SHARPNESS 10
<LINE LOCK>
PRIVACY ZONE
-
The White Balance can be set to ATW (Auto Tracking White)/AUTO/ONE PUSH WB.
- ATW automatically adjusts the white balance for color temperatures from 2000K to
10000K,
-AUTO automatically adjusts the white balance for color temperatures from 3000K to
7500K.
- ONE PUSH WB can be set using 73 PRESET from a controller.
To change the White Balance:
1. Enter 95 preset to access the main menu.
2. Position the cursor (^) next to CAMERA SETUP and press the OPEN button to
access the Camera menu.
3. Position the cursor next to WB and press the OPEN button to move the cursor to
the right.
4. Move the joystick up or down to select ATW, AUTO, or ONE PUSH WB.
5. To accept the selection, press the OPEN button or to cancel the selection, press
the CLOSE button.
6.4.3 AE CONTROL
Direct
- The Iris can be controlled directly using OPEN or CLOSE controls.
- 1 1