KORG Concert 800 - Manual (Page 12)

U s i n g M u l t i - M o d e P l a y
@Selecting two out of the C-600's five timbres at a time and playing one of these
two on the keyboard-________________________________________________________________________
Here’s how to play the piano left hand and the strings automatically, allowing the
piano right hand to be played on the keyboard- Once you have mastered these
examples, you may wish to refer to the section on ’’parts” on page 00 for more
information on this mode of operation.
0When power is first turned on and multi mode
entered, playing the keyboard will produce
the piano timbre. Set the Concerto to record
mode and record the left-hand piano part into
Song 1.
(See the Concerto Owner’s Manual for dataiIs. )
(Switch)
A /
(PIANO timbre from keyboard)
(DPress the HARPSI switch while holding the
MIDI/TRANSPOSE switch down.
The HARPSI switch will light indicating that
Part 2 has been selected. When you let go of
the MIDI/TRANSPOSE switch, the STRINGS switch
will light indicating that the Strings timbre
is now selected for Part 2- Playing the key­
board will now produce the strings timbre.
Set the Concerto to record mode and record
the strings part into Song 2-
(Switch)
(Switch)
\ L
I
A /
STRINGS
(STRINGS timbre from keyboard)
(DPress the PIANO switch while holding the MIDI
/TRANSPOSE switch down. The PIANO switch will
light indicating that Part 1 has been select­
ed. (When you let go of the MIDI/TRANSPOSE
switch, the PIANO switch will light indica­
ting that the Piano timbre is selected for
Part 1. ) Playing the keyboard will now
produce the piano timbre-
(Switch)
(PIANO timbre from keyboard)
@Use the Concerto to play back the
piano data from Song 1 and the
strings data from Song 2-
You can use the keyboard to play
along on the piano-
I--- PIANO & STRINGS timbres
from CONCERTO)
ilWIiililMilffi
(PIANO timbre from keyboard)
-
11
-