Setting midi functions, In multi mode, In single mode – KORG Concert 800 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S e t t i n g M I D I F u n c t i o n s
[ I n m u l t i m o d e ]
Program change cancel cannot be set in multi mode. However, it is possible to set
program change cancel in single mode and then change to multi mode, thereby
achieving the same effect.
"Control change" is data that changes the way that the damper pedal, soft pedal,
and sostenuto pedal are handled. Turn on control change cancel in order to
inhibit sending and receiving of control changes from a sequencer, for example.
MJDWTRANSPOSE
[ I n s i n g l e m o d e ]
Press the VIBES switch while holding the
MIDI/TRANSPOSE switch down.
This turns program change cancel on and off.
[ I n m u l t i m o d e ]
Control change cancel cannot be set in multi mode. However, it is possible to set
control change cancel in single mode and then change to multi mode, thereby
achieving the same effect.
power;/
S i n g l e M o d e
M u l t i M o d e
O m n i M o d e
O m n i 0 n
O m n i o f f
L o c a l M o d e
L o c a l o n
L o c a l o f f
Program Change Cancel
off
off
Control Change Cancel
off
off
M I D I C a r t n e l
1
S e e chart below
When power is turned on in multi mode, the settings are as follows:
MIDI Send Channel
MIDI Receive Channel
T i mh r e
P a r t i C h a n n e 1
1
C h a n n e l 1
P i a n o
C h a n n e l
2
C h a n n e l 2
S t r i n g s
P a r t s C h a n n e 1
3
N o t a c c e p t e d
Not sounded
e l o c i t y C u r v e S e l e c t
Velocity refers to the strength with which keyboard keys are struck.
The C-800 controls the volume and timbre in response to velocity in the same way
as a piano does. When the C-800 is connected to a synthesizer, the effect may be
somewhat unnatural. If this is the case, set the velocity curve to "synthesizer".
Press B7 while holding MIDI/TRANSPOSE down to choose synthesizer, or press C8 to
choose piano.
★MIDI mode can’t be entered when holding down keyboard keys or the pedals. Also, no
sound will be heard from the speakers in MIDI mode.
★Part 3 will always accept program change and program control data regardless of
program change cancel and program control cancel.
-
16
-