KORG Concert 800 - Manual (Page 13)

U s i n g M u l t i - M o d e P l a y
The current state of the C-800 and Concerto is shown on the next page. In recording
mode, choosing Part 1 sends piano data from the keyboard to Concerto Song 1- The
piano timbre will be used for Part 1 data- MIDI channel 1 is used to tie Part 1
to Song 1- In the same way. choosing Part 2 sends strings data from Part 2 to Song
2, via MIDI channel ”2”.
In playback mode, the piano and strings timbres are "played” automatically by the
data received from the Concerto, regardless of the current Part selection.
Selecting Part 1 allows that timbre to be played from the keyboard.
(pCreating an additional timbre with the Symphony orchestra module, etc, and playing
one of these from the keyboard-_______________________________________________________
Next we will describe how to add the Chorus timbre from the Symphony to the piano
and strings timbres used in ®. First, connect the C-800, Concerto, and Symphony
together as shown below.
(DChoose the Chorus timbre, MIDI channel 3, and Omni Off on the Symphony.
(See the Symphony Owner’s Manual for details. )
-
12
-