Toshiba MA-205 - Manual (Page 36)

Fig. 7
Journal
Inlet
Fig. 9
Mg. 10
Fig. 11
REMOVING THE RECEIPT PAPER
1. Remove the Paper Cover.
2. Press the Free Lever down and pull
the old paper core upward to remove
the remaining paper end. (Fig.7)
INSTALLING THE JOURNAL PAPER
Mode Lock to the "REG"
in
the
the
two
1. Turn the
position.
2. Remove the Paper Cover by pulling it
upward, and remove the Journal
Winding Reel. (Fig.l)
3. Follow Steps 3 and 4 of INSTALLING
THE RECEIPT PAPER on the previous
page.
4. Place the paper roll
inner-side roll holder of
holders. (Fig.8)
5. Insert the paper end into the Journal
Inlet, feed the paper in while
pressing down the [JF] key. (Fig.9)
6. When the paper comes out for a enough
length, open the folded end.
(Fig.10)
7. Wind the paper end on the Journal
Winding Reel two or three times as
shown in Fig.11.
Set the Journal Winding Reel to the
Reel Holder. (Fig.12)
Attach the paper cover.
8
REMOVING THE JOURNAL PAPER
1. Remove the Paper Cover.
2. Press the [JF] key to wind up enough
portion of the journal paper, and
then tear off the paper, holding the
Journal Winding Reel.
3. The wound-up portion of the paper can
easily be removed from the Reel by
pulling it side way. (Fig.13)
4. If enough paper remains on the roll,
follow Steps 6 through 9 above; if
paper is running out, follow Steps 1
through 9 above.
Fig. 13
- 3 3 -