Toshiba SD-V290-S-TU - Manual (Page 13)

Connections (Continued)
Optional, Preferred TV Connections
ES Notes
• You can ONLY watch and listen to DVD playback
through the connections shown below.
• When using the COMPONENT VIDEO OUT jacks,
set the video output select switch to COMPO­
NENT. When using the S-VIDEO OUT Jack, set the
video output select switch to S-VIDEO.
S-Video connection
Í Connect the S-VIDEO OUT jack on the DVD+VCR
to the S-Video in jack on the TV using the optional
S-VIdeo cable (S).
f Connect the Left and Right AUDIO OUT jacks of
the DVD+VCR to the audio left/right in jacks on the
TV using the supplied audio cables (A2).
Component Video (Color Stream®) connection
f Connect the COMPONENT VIDEO OUT jacks on
the DVD Player to the corresponding in jacks On
the TV using an optional Y Pb Pr cable (C).
Connect the Left and Right AUDIO OUT jacks of
,_ the DVD+VCR to the audio left/right in jacks on the
TV (A2) using the supplied audio cables.
E3Note
If the TV has an S-video input, connect the DVD player
with the S-video cable. When using an S-video cable,
do not connect the yellow video cable.
g
CC
g
UJ
CC
Q.
o
Rear of DVD+VCR
1-15