Toshiba SD-V290-S-TU - Manual (Page 25)

Operation with tape (Continued)
Checking (Erasing) the Timer Program
Programming can be checked whenever the DVD+VCR
is turned on.
1 Press VCR MENU and the MAIN menu will appear.
2 Use A/T to choose the PROGRAM menu.
Press ENTER and the PROGRAM menu will appear.
3 Use to select a program you want to check or
erase. If you want to erase the program, press
CLEAR.
4 Press VCR MENU to return to the TV screen.
Program Priority
7:00 PM BtOOPM 9:00 PM 1(MX>PM
I I I l ~
|PngNo.2
M
Ö
Thasa portions will
not bo roQordad.
. If the recording start and end
^ times of preset programs
overlap on the same day (see
]PmgNo.3
the example and diagram
left), program number 2 will
not be recorded until program
number 1 is finished.
The first part of program number 2 will not be recorded.
The same thing will happen to program number 3.
One touch Timer Recordlng(OTR) * •
One touch Timer Recording allows you to make a
recording easily of a preset length without using the
program timer.
Preparation:
• Turn on the power of both the DVD+VCR and the TV.
• Be sure the TV is tuned to the DVD+VCR output channel (3
or 4).
• if a direct VIDEO/AUDIO connection Is made between the
DVD+VCR and the TV, set the TV’s source selector to
VIDEO.
^ Insert a video cassette with the safety tab intact.
^ Select the desired channel by using CH/TRK
(— (+/-) or number (0-9).
The channel number appears on the TV screen.
• if you are recording from another source via audio/video
input jacks (at ihs Rear or Front panel), select the
LINE1 orLINE2.
i
s
Set the desired recording speed (SP or SLP) by
pressing SP/SLP.
The tape speed will appear on the TV screen.
Press REC/OTR twice.
The menu as illustrated, will appear on the TV screen.
• Recording will start. (The TIMER indicator will light)
Press REC/OTR repeatedly to select the
recording time length.
At the end of the recording, the DVD+VCR wiil stop
recording and shut off.
• During One touch Timer Recording, changing the chan­
nel on the DVD+VCR will not be possible.
• You can slop the recording by pressing STOP.
g
cc
UJ
Q.
o
ONE TOUCH TIMER RECORD MENU
Olic TOUCH TIMER RECORD
CHANNEL 2
SPEED SP
START
LENGTH
NOW
OH30M
QH^M 9H00M -r QHOOM
Length Display
(each additional press of
REC/OTR increases
recording time 30 minutes)
Checking the Recording Time
Press REC/OTR once to check the recording time. The
recalled setting will automatically return to the TV
screen after 6 seconds.
To extend the Recording Time
The recording lime can be extended anytime by press­
ing REC/OTR.
Subsequent presses result in advancing the recording
time by 30-minute increments to a maximum fo 9 hours.
ES
Notes
• If you press PAUSE/STILL during One touch timer recording,
the DVD+VCR will enter the recording pause mode. Instant
timer recording is cancelled.
• If the DVD+VCR is set to “OHOOM”, the DVD+VCR goes to
normal recording mode.
1-27