Dubbing and editing, Copying from dvd to vcr, Operation with tape (continued) – Toshiba SD-V290-S-TU User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Operation with tape (Continued)

Dubbing and Editing

if you wish to edit or dub your camcorder (or another
VCR) recordings to this DVD+VCR, the rear (or Front)
panei mounted Audio and Video (A/V) input jacks
make the connections quick and easy. These direct

A/V jacks wili also provide better picture resuits than

using the RF jack on the rear panel.

f

Connect the camcorder’s (or another VCR’s) A/V

outputs to your DVD-t-VCR as illustrated on page

14.

f

Set the input channel “LINE2”. (press INPUT

SELECT to select LINE2.)

• If you have connected your DVD+VCR to the A/V

input jacks on the rear of DVD+VCR, you should
select the input channel LINE1 by pressing INPUT
SELECT twice.

Play the tape in the camcorder (or another

_ VCR). If you have a TV attached to your

DVD+VCR, you can see the video playing.

f

When your desire recording begins, press

DVD+VCR’s REC/OTR once to start.

BNote

Before recording, please confirm the recording start position.

Copying from DVD to VCR

This unit allows you to copy the contents of a DVD to a
VMS tape.

9 Note
If the DVD you are attempting to copy is copy protected,

you will not be able to copy the disc, it is not permitted
to copy Macrovision encoded DVDs. “Lock” is
displayed in the display window.

f

Insert Disc

insert the disc you wish to copy in the DVD deck
and close the disc tray.

f

Insert VHS Tape

insert a blank VHS video tape into the VCR deck.

Press PLAY on the DVD deck.

The DVD will go into play mode

• If the DVD disc menu appears, you may need to press

the PLAY manually to begin copying.

f

Press REC on the VCR deck.

• The DVD+VCR will go into Record mode.
• “CD REC” indicator will light.

f

Stop the Copy Process

When the DVD is finished playing, press the VCR on the

remote control and then press STOP (■) to end the copy.

You must stop the Copy process manually when the DVD

movie ends, or the unit may replay and record over and

over again.

S3 Note

When you stop the DVD playback during copying, the record­
ing on VCR is stopped automatically.

8

1-28

Advertising