Using this feature, Play mode, Controlling the ipod® or external usb device – Chrysler 2014 200 Convertible - Owner Manual User Manual

Page 277: Using radio buttons

Advertising
background image

NOTE:

If the audio device battery is completely dis-

charged, it may not communicate with the iPod®/USB/
MP3 control system until a minimum charge is attained.
Leaving the audio device connected to the iPod®/USB/
MP3 control system may charge it to the required level.

Using This Feature

By using an iPod® cable, or an external USB device to
connect to the USB port:

• The audio device can be played on the vehicle’s sound

system, providing metadata (artist, track title, album,
etc.) information on the radio display.

• The audio device can be controlled using the radio

buttons to Play, Browse, and List the iPod® contents.

• The audio device battery charges when plugged into

the USB/AUX connector (if supported by the specific
audio device).

Controlling The iPod® Or External USB Device
Using Radio Buttons

To get into the iPod®/USB/MP3 control mode and
access a connected audio device, either press the “AUX”
button on the radio faceplate or press the VR button and
say

ЉUSBЉ or ЉSwitch to USB.Љ Once in the iPod®/USB/

MP3 control mode, audio tracks (if available from audio
device) start playing over the vehicle’s audio system.

Play Mode

When switched to iPod®/USB/MP3 control mode, the
iPod® or external USB device automatically starts Play
mode. In Play mode, the following buttons on the radio
faceplate may be used to control the iPod® or external
USB device and display data:

• Use the TUNE control knob to select the next or

previous track.

4

UNDERSTANDING YOUR INSTRUMENT PANEL

275

Advertising