Chrysler 2014 200 Convertible - Owner Manual - Manual (Page 406)

2. Loosen, but do not remove, the wheel nuts by turning
them to the left one turn while the wheel is still on the
ground.
CAUTION!
Do not attempt to raise the vehicle by jacking on
locations other than those indicated in Step 3.
3. There is a front and rear jacking location on each side
of the vehicle. The plastic trim has been cut away to
expose the jacking locations on the body.
Removing Jack H3andle From Jack
Front Jacking Location
404 WHAT TO DO IN EMERGENCIES