Auto unlock on exit, Auto unlock door on exit programming – Chrysler 2014 200 Convertible - Owner Manual User Manual

Page 36

Advertising
background image

auto door lock feature can be enabled or disabled by your
authorized dealer. Please see your authorized dealer for
service.

Auto Unlock On Exit

The doors will unlock automatically on vehicles with
power door locks if:

1. The Automatic Unlock Doors On Exit feature is en-

abled.

2. The transaxle was in gear and the vehicle speed

returned to 0 mph (0 km/h).

3. The transaxle is in NEUTRAL or PARK.

4. The driver door is opened.

5. The doors were not previously unlocked.

6. The vehicle speed is 0 mph (0 km/h).

Auto Unlock Door On Exit Programming

The Automatic Unlock Doors On Exit feature can be
enabled or disabled as follows:

• For vehicles equipped with the Electronic Vehicle

Information Center (EVIC), refer to “Electronic Vehicle
Information

Center

(EVIC)/Personal

Settings

(Customer-Programmable Features)” in “Understand-
ing Your Instrument Panel” for further information.

• For vehicles not equipped with the EVIC, perform the

following procedure:

1. Close all doors and place the key in the ignition.

2. Cycle the ignition switch between LOCK and ON/

RUN and then back to LOCK four times ending up in
the LOCK position.

3. Press the power door UNLOCK switch to unlock the

doors.

34

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising