Chrysler 2015 300 - User Guide User Manual
Page 142
Advertising
4. Place the jack underneath the lift area that is closest to the flat tire. Turn the jack screw
clockwise to firmly engage the jack saddle with the lift area of the sill flange.
NOTE:
If the vehicle is too low for jack placement, slide the jack on its side and rotate it up into position.
5. Raise the vehicle just enough to remove the
flat tire and install the spare tire.
6. Remove the lug nuts and tire.
Front Jacking Location
Rear Jacking Location
W H A T T O D O I N E M E R G E N C I E S
140
Advertising