Chrysler 2015 300 - User Guide - Manual (Page 79)

MEDIA HUB — PLAYING iPod®/USB/MP3 DEVICES
There are many ways to play music from
iPod®/MP3 players or USB devices through
your vehicle's sound system.
• Press your “Media” button on the touch-
screen to begin.
USB Port
Connect your iPod® or compatible device us-
ing a USB cable into the USB Port. USB
Memory sticks with audio files can also be used.
Audio from the device can be played on the
vehicle's sound system while providing meta-
data (artist, track title, album, etc.) information
on the radio display.
When connected, the iPod®/compatible USB
device can be controlled using the radio or
Steering Wheel Audio Controls to play, skip to
the next or previous track, browse, and list the contents.
The iPod® battery charges when plugged into the USB port (if supported by the specific device).
To route the USB/iPod® cable out of the center console, use the access cut out.
NOTE:
• When connecting your iPod® device for the first time, the system may take several minutes to
read your music, depending on the number of files. For example, the system will take
approximately five minutes for every 1,000 songs loaded on the device. Also during the
reading process, the Shuffle and Browse functions will be disabled. This process is needed to
ensure the full use of your iPod® features and only happens the first time it is connected. After
the first time, the reading process of your iPod® will take considerably less time unless changes
are made or new songs are added to the playlist.
• The USB port supports certain Mini, Classic, Nano, Touch, and iPhone® devices. The USB
port also supports playing music from compatible external USB Mass Storage Class memory
devices. Some iPod® software versions may not fully support the USB port features. Please visit
Apple’s website for iPod® software updates.
Uconnect® Media Hub
1 — SD Card Slot
2 — USB Port
3 — AUX Port
E L E C T R O N I C S
77