Chrysler 2015 300 - User Guide - Manual (Page 35)

Rain Sensing Wipers
This feature senses moisture on the vehicle's windshield and automatically activates the wipers
for the driver when the switch is in the intermittent position. Rotate the end of the lever to one of
four settings to activate this feature and adjust sensitivity.
Rain Sensing can be turned on and off using the Uconnect® System, refer to the Owner's Manual
on the DVD for further details.
High Beam Operation
Push the lever forward to activate the high beams. Pull the lever toward you for flash to pass.
NOTE:
For safe driving, turn off the high beams when oncoming traffic is present to prevent headlight
glare and as a courtesy to other motorists.
HEADLIGHT SWITCH
Automatic Headlights/Parking Lights/Headlights
• Rotate the headlight switch, located on the
instrument panel to the left of the steering
wheel, to the first detent from the off posi-
tion for parking light and to the sec-
ond detent for headlight .
• With the parking lights or low beam head-
lights on, push the headlight switch for fog
lights. Pushing the switch a second time will
deactivate the front fog lights. Turning the
headlight switch off will also deactivate the
fog lights.
• Rotate the headlight switch to “AUTO” for
AUTO headlights.
• When set to AUTO, the system automati-
cally turns the headlights on or off based on
ambient light levels.
Light Control Switches
1 — Auto
2 — Push For Fog Lights
3 — Rotate Headlight Switch
4 — Rotate Dimmer
5 — Rotate Ambient Light Control
O P E R A T I N G YO U R V E H I C L E
33